Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 226)

Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Note - The current firmware version may, at times, return duplicate Forwarding
Database table entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Port Menu
From the Port menu, you can view and edit MIB information about the port. For each Port
menu option, select first the slot in the SwitchBlade chassis, then the ports in the line card
for which you require information. Note that the Port Number shown is the value of the
MIB object ifIndex, except for the STP Info option, which shows the value of the MIB object
dot1dBasePort.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Detail Info
Displays detailed information about the ports, including multicast and broadcast
packets received and transmitted.
Error Statistics
Displays error statistics.
AlliedView™-EMS 4.0.1 Device Management Guide Page 226 of 411