Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 207)

Device Manager LEDs for the AT-Rapier 48w
LED State Description
PWR Green The router is receiving power from the main power supply unit.
FAN 1 and
FAN 2 Green
Gray
The FAN module is present and is turned on.
The FAN module is not present.
DUPLEX Green
Orange
The port is operating at full-duplex.
The port is operating at half duplex.
Agent Menu
From the Agent menu, you can view and edit the system information for the router, or log
into the CLI using Telnet.
System Info
Standard
Displays basic system information, including system name, location, contact and
description.
Enterprise
CPU Utilization
Displays information about the CPU utilization over different periods of time.
Power Supply Info
Displays information about the power supply, redundant power supply and
power supply monitoring.
Fan and Power Supply
Displays information about type and status of the Fan and PSU.
Note - The current firmware version returns a 'noSuchName' value for the
Power Supply Unit Power Status parameter.
Temperature
Displays information about the temperature monitored by the temperature
sensors in the device.
Note - The current firmware version does not allow the Temperature
Threshold parameter to be configured.
Host Resources
General System Info
Displays general information about the host resources.
AlliedView™-EMS 4.0.1 Device Management Guide Page 207 of 411