Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 250)

ƒ Box ID 1 - 1 to 64
ƒ Box ID 2 - 65 to 128
ƒ Box ID 3 - 129 to 192
ƒ Box ID 4 - 193 to 256
ƒ
Box ID 5 - 257 to 320
ƒ Box ID 6 - 321 to 384
ƒ Box ID 7 - 385 to 448
ƒ Box ID 8 - 449 to 512
ƒ Box ID 9 - 513 to 576
ƒ Box ID 10 - 577 to 640
ƒ Box ID 11 - 641 to 704
ƒ Box ID 12 - 705 to 768
This numbering scheme assumes that a unit can have a maximum of 64 ports.
Note - The current firmware version does not allow Device Manager to detect the presence
or absence of an SFP module in any of the SFP slots. As a result, the SFP slots on the device
image will always show SFP images regardless of whether or not SFP modules are physically
present in the slots.
Note - Status information for ports 21 to 24 on the AT-9724TS and ports 45 to 48 on the
AT-9748TS/XP will always be reflected on both the RJ-45 port images and the SFP port
images regardless of whether it is the RJ-45 or the SFP ports that are actually in operation.
However, if Device Manager detects that the established link speed is less than 1Gbps, only
the RJ-45 port images will turn green.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Device Info
Equipment Capacity
Displays the equipment capacity supported in the system.
Power Supply Info
Displays information about the power supply and redundant power supply .
Fan Info
Displays fan status.
AlliedView™-EMS 4.0.1 Device Management Guide Page 250 of 411