Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 292)

Displays basic system information, including system name, location, contact and
description.
Note - Valid MIB Set values for the System Contact and System Location parameters
are up to 255 characters. Attempting to enter values greater than the valid range
will be accepted but values exceeding 255 characters will be truncated.
Note - Valid MIB Set values for the System Name parameter is up to 255 characters.
However, values exceeding 64 characters will be truncated.
Note - The current firmware version allows the System Name parameter to be set
to 'NULL'. However, attempting to set this parameter to value 'NULL' will set it to
its default value 'awplus'.
Enterprise
CPU Utilization
Displays information about the CPU utilization over different periods of time.
Fan Speeds
Displays information about fans installed in the device that have their fan speeds
monitored by environment monitoring hardware.
Voltage Rails
Displays information about voltage rails in the device that are monitored by
environment monitoring hardware.
Temperature Sensors
Displays information about the temperature monitored by the temperature sensors
in the device.
LED Faults
Displays information about the LEDs on the device.
Contact Details / Memory
Displays Contact Details information and Memory information of the device.
Host Resources
General System Info
Displays general information about the host resources.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Time and Date parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Note - The Time and Date, Initial Load Device and Initial Load Parameter parameters
are implemented as 'read-only'.
Logical Storage Areas
AlliedView™-EMS 4.0.1 Device Management Guide Page 292 of 411