Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 172)

Note - The current firmware version does not allow the Temperature
Threshold parameter to be configured.
Host Resources
General System Info
Displays general information about the host resources.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Time and Date parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Note - The Time and Date and Initial Load Parameter parameters are implemented
as 'read-only'.
Logical Storage Areas
Displays resource information about the storage devices.
Note - The Storage Size parameter is implemented as 'read-only'.
Devices
Displays resource information about the devices installed in the host.
Hardware Info
Total Boards
Displays the number of boards that are currently installed.
Board Info
Displays basic information on the boards that are currently installed.
Slot Info
Displays information on the Power Supply Bay slots.
Physical Interfaces
Displays information about the interfaces found in the device.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the device.
Note - The current firmware version returns a 'noSuchName' value for the Release
File Exists? and Patch File Exists? parameters.
Install History
Displays information about the install history.
Configuration File
Displays the Configuration file name.
AlliedView™-EMS 4.0.1 Device Management Guide Page 172 of 411