Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 62)

General Tuning
Displays general tuning information.
Note - The current firmware version accepts values in the range [0-255] inclusive for
the Debug Level parameter.
Max Entries Tuning
Displays information about the maximum entries in tuning.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Max IP Next Hop Entries After Reset
ƒ Max IP Prefixes After Reset
ƒ Max IP ECMP Entry After Reset
ƒ Max IP Interfaces After Reset
TCP Tuning
Displays the memory pool size for tcp tuning.
Radius Tuning
Displays the memory pool size for radius tuning.
Syslog Tuning
Displays the current cache size and its size after reset.
Management ACL Tuning
Displays the current number of access rules and the number after reset.
SSH Tuning
Displays the current number of the maximum number of authorized keys and its
value after reset.
Terminal Sessions
Displays the current number of maximum sessions and its value after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative cache entries
before and after reset.
Tuning Parameters
Displays the current value, value after reset, default value, minimum and maximum
value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
AlliedView™-EMS 4.0.1 Device Management Guide Page 62 of 411