Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 260)

Component
Displays the list of objects specific to a PIM.
Note - The Component sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Candidate - BSR
Displays the Candidate - Boot Strap Router configuration.
Register Checksum
Displays the Register Checksum including Data RP List settings.
Static RP
Displays the Static RP settings configured in the router.
Note - The current firmware version does not allow the RP Address parameter to
be configured.
Note - The current firmware version returns an incorrect value for the RP Address
and Row Status parameters whenever the Get MIB Value button is used.
IPM
Basic Info
Displays basic information about IP Multicast Routing Protocol.
Interface Info
Displays the list of multicast routing information specific to interfaces.
Note - The current firmware version returns 'noSuchName' for the following
parameters:
ƒ
Rate Limit
ƒ Received Multicast Octets
ƒ Transmitted Multicast Octets
ƒ Received Multicast Octets (HC)
ƒ Transmitted Multicast Octets (HC).
Note - The current firmware version does not allow the Datagram TTL Threshold
parameter to be configured.
Scope Name Info
Displays the list of multicast scope names.
Note - The Scope Name Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a
value of 'noSuchName'.
AlliedView™-EMS 4.0.1 Device Management Guide Page 260 of 411