Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 73)

SSH Client
Displays information about the user name ssh client will use and the value of the
regenerated self key.
Note - The current firmware version accepts up to 60 characters for the User Name
parameter.
Note - Setting the Regenerate Self Key parameter to "rsa" or "dsa" will result in the
error message: "The error occurred with 'Set' operation. Error: time out occurred".
Connection with the AT-8000S device will be lost and the only way to re-establish
connection will be to perform a manual reset.
Note - The current firmware version does not allow the Regenerate Self Key
parameter to be set to 'rsa1'.
Secure Socket Layer
Basic Info
Displays basic SSL information.
Note - The current firmware version does not allow the Certificate Save parameter
to be configured.
Certificate Generation
Displays information about the generated keys and self signed certificates.
Note - The current firmware version does not allow any of the parameteres under
this table to be configured.
Export Certificate
Displays information about the saved data from RAM and flash.
Import Certificate
Displays information about the copied external certificate of the device.
RMON Menu
From the RMON menu you can view and edit the RMON MIB.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON History table.
Alarm Table
Displays the RMON Alarm table.
AlliedView™-EMS 4.0.1 Device Management Guide Page 73 of 411