Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 293)

Displays resource information about the storage devices.
Note - The current firmware version returns a "noSuchName" value for the
Allocation Failures parameter.
Note - The Storage Size parameter is implemented as 'read-only'.
Devices
Displays resource information about the devices installed in the host.
Note - The current firmware version returns the value 'NULL' for the Device ID
parameter.
Processors
Displays basic information about the processor installed in the host.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Firmware Product ID parameter will display a sequence of bytes in
hexadecimal format instead of the actual integer value.
Running Software
Displays each distinct piece of software that is running or loaded into physical or
virtual memory of the device.
Note - The current firmware version returns the value 'NULL' for the Run ID
parameter.
Note - The Status parameter is implemented as 'read-only'.
Software Performance
Displays the CPU and Memory Software running performance of the device.
Host Info
Displays the host information of the device.
Hardware Info
Installed Modules Info
Displays information about the expansion modules installed in the device.
Note - The current firmware version does not allow the Board Bay parameter to be
configured. Attempting to configure this parameter to any valid value will result in
the error "The error occurred with 'Set' operation. Error: gen error".
Firmware Info
Current Firmware
Displays information about the current software version installed in the
device.
AlliedView™-EMS 4.0.1 Device Management Guide Page 293 of 411