Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 174)

Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Note - The Physical Address and Mapping Type parameters are implemented as
'read-only'.
Address Table
Displays the list of IP interfaces on the switch.
Route Number
Displays the IP routing number on the switch.
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version returns the value 'NULL' for the
Routing Protocol MIB parameter.
Note - The following parameters are implemented as 'read-only':
ƒ Destination Port Number
ƒ Routing Type
ƒ Next Hop AS Number
ƒ Destination Metric 1
ƒ Destination Metric 2
ƒ Destination Metric 3
ƒ Destination Metric 4
ƒ Destination Metric 5
ƒ Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note - The Default TTL parameter is implemented as 'read-only'.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
AlliedView™-EMS 4.0.1 Device Management Guide Page 174 of 411