Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 313)

System Log
Log Entries
Displays information of the log entries on the device.
Note - The current firmware version returns a 'noSuchName' value intermittently
for the Log Entries parameter when using SNMPv1.
Log Options
Displays the log options on the device.
Trigger
Trigger Info
Displays the trigger configuration information in the device.
Trigger Counters
Displays counters in activation of the triggers in the device.
Remote Ping
Ping Objects
Displays the maximum number of concurrent active ping requests.
Note - The Target Address Type parameter is implemented as 'read-only'.
Ping Control
Defines the Ping Control Table for providing, via SNMP, the capability of performing
ping operations at a remote host.
Note - The current firmware version returns a 'noSuchName' value for the Owner
Index and Test Name parameters.
Note - Device Manager does not handle MIB table with Read-Create access
correctly. Attempting to set any parameters of this table will result in the error "The
Error occurred with 'Set' operation.Error:NoSuchname".
Ping Results
Displays the results of the performed ping operations in the Ping Control table.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Target IP Address parameter will display a sequence of bytes in
hexadecimal format instead of the actual IP address of the remote host.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Last Good Probe parameter will display a sequence of bytes in
hexadecimal format instead of the actual date and time of day.
Ping Probe History Table
Displays ping probe history in performing ping operations.
AlliedView™-EMS 4.0.1 Device Management Guide Page 313 of 411