Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 37)

SSH Tuning
Displays the current number of the maximum number of authorized keys and
its value after reset.
Terminal Sessions
Displays the current number of maximum sessions and its value after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative cache
entries before and after reset.
Tuning Parameters
Displays the current value, value after reset, default value, minimum and
maximum value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
Terminal Debug Mode
Displays the terminal debug mode password.
Note - The current firmware does not allow the Terminal Debug Mode Password
parameter to be configured.
Telnet
Basic Info
Displays the basic telnet information.
Note - The current firmware does not allow the Password parameter to be
configured.
Telnet Sessions
Displays the login time, client ip address and telnet session status.
CLI Info
Displays information if the file is enabled or not.
Note - The current firmware does not allow the Password parameter to be
configured.
Note - The current firmware version does not allow Device Manager to
handle 'TruthValues' for the File Enable After Reset parameter. As a result,
Device Manager will display integer values of '1' and '2' instead of the value
'True' or 'False' for this parameter.
AlliedView™-EMS 4.0.1 Device Management Guide Page 37 of 411