Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 30)

AlliedView™-EMS 4.0.1 Device Management Guide Page 30 of 411
Interface Info
Displays port statistics such as the number of packets received and transmitted on
rt, bytes received and transmitted on the port and port status.
tistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port and port status.
Detail In
rmation such as duplex mode.
e - The current firmware version does not return the correct value for the Port
be configured.
Spannin
oring
ring parameters and allows configuration of port mirroring state,
source and destination.
IGMP S
e of IGMP Snooping and allows reconfiguration.
Standard
the po
Note - The current firmware version returns a NULL value for the Specific Media
MIB parameter.
Additional Info
Displays port sta
Note - The Deferred Transmissions parameter is not applicable to the AT-8000/8POE
and should be ignored.
Error Statistics
Displays error statistics.
fo
Displays detailed port info
Not
State parameter. It also does not allow the parameter to
Note - The Port Flow Control and Port QoS Priority parameters are not applicable
to the AT-8000/8POE and should be ignored.
g Tree Info
Displays the port's spanning tree parameters.
Enable
Enables the port.
Disable
Disables the port.
Port Mirr
Displays port mirro
nooping
Displays the current stat
8000/8POE AT-