Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 29)

AlliedView™-EMS 4.0.1 Device Management Guide Page 29 of 411
• Set the etherStatsStatus (1.3.6.1.2.1.16.1.1.1.21) object to "createReque
• Set the etherStatsDataSource (1.3.6.1.2.1.16.1.1.1.2) object to the OID of
Eth
st(2)"
the
ernet interface to monitor (e.g. 1.3.6.1.2.1.2.2.1.1.1 - Port 1)
• Set the etherStatsStatus object to "valid(1)"
s
icast frames.
erred Transmissions parameter is not applicable to the AT-
Error
ent
isions and total transmit errors.
History Control Table
Note - To maintain a history of statistics taken at particular intervals for an interface,
ing using a MIB browser tool that allows you to issue an SNMP Set
e (1.3.6.1.2.1.16.2.1.1.2) object to the OID of
the Ethernet interface for which historical data will be collected (e.g.
tatus object to "valid(1)"
Alarm Table
Event Table
ays the RMON Event table.
ent Log
lays the RMON Event log.
ort Menu
From the Port menu, you can view and edit MIB information about the port.
Displays the port's utilization information.
Additional Info
Displays additional traffic statistics in the network segment such as frame
received/sent, collisions, broadcast frames and mult
Note - The Def
8000/8POE and should be ignored.
Displays error statistics in the network segment such as CRC errors, alignm
errors, bad frames received late coll
Displays the RMON History table.
do the follow
request on a specific table element:
• Set the historyControlStatus (1.3.6.1.2.1.16.2.1.1.7) object to
"createRequest(2)"
• Set the historyControlDataSourc
1.3.6.1.2.1.2.2.1.1.1 - Port 1)
• Set the historyControlS
Displays the RMON Alarm table.
Displ
Ev
Disp
P
Utilization