Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 44)

Cache Info
Displays information about a collection of objects providing access to and control of
a Domain Name System resolver's cache.
Negative Cache Info
Displays information about a collection of objects providing access to and control of
a Domain Name System resolver's negative response cache.
Additional Counters
Displays information about a collection of objects providing further instrumentation
applicable to many but not all Domain Name System resolvers.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Aging Time Info
Displays information about the device's aging time.
Spanning Tree Info
STP
Standard
Displays the spanning tree information such as the STP version and path cost.
Note - Valid MIB Set values for the Priority parameter is [0-65535] inclusive.
However, attempting to set this parameter to any value beyond 61440 will
result in the error "The error occurred with 'Set' operation. Error. bad
value.".
Additional Info
Displays additional Spanning Tree Protocol information like supported type.
Note - The current firmware version does not allow the Flood BPDU
Method parameter to be set to 'bridging' as its value.
Note - The current firmware version does not allow Device Manager to
handle 'TruthValues' for the STP Enable and Filter BPDU parameters. As a
AlliedView™-EMS 4.0.1 Device Management Guide Page 44 of 411