Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 131)

LLDP Configuration
General Config
Displays basic LLDP configuration.
Port Config
Displays LLDP configuration for each port.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display an 8-bit
binary string instead of the actual TLV types allowed. However, the TLV types
allowed can still be determined by looking at the bits that are on from left to right:
ƒ Bit 0 - Port Description
ƒ Bit 1 - System Name
ƒ Bit 2 - System Description
ƒ Bit 3 - System Capabilities
LLDP Statistics
Remote Tables
Displays statistics for the LLDP remote tables.
Port Tx
Displays statistics for LLDP frames transmitted.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Port Rx
Displays statistics for received LLDP frames.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Local System Data
General Info
Displays information about the local LLDP system.
Port Info
Displays information on the LLDP of local ports.
Note - The current firmware version returns a 'noSuchName' value for the Port
Number parameter.
Management Addresses
Displays management addresses of the local LLDP system.
AlliedView™-EMS 4.0.1 Device Management Guide Page 131 of 411