Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 47)

ƒ Method List Name Level 6
ƒ Method List Name Level 7
ƒ Method List Name Level 8
ƒ Method List Name Level 9
ƒ
Method List Name Level 10
ƒ Method List Name Level 11
ƒ Method List Name Level 12
ƒ Method List Name Level 13
ƒ Method List Name Level 14
ƒ Method List Name Level 15
As a result, it will display the values: 'enable_n_default', 'enable_c_default',
'login_n_default', 'login_c_default', 'http', 'https' and 'null' as valid values instead of
allowing the user to enter up to 20 characters for these parameters.
Note - The current firmware version does not allow the Password Valid Time
parameter to be configured.
Local Users
Displays information about all usernames, their passwords and their authorizations.
Note - The current firmware version does not allow the Password Valid Time
parameter to be configured.
Authenticated Users
Displays all the current users that have been authenticated.
EAP Method Lists
Displays information about all Extensible Authentication Protocol method lists.
Note - The current firmware version does not allow the Row Status parameter to be
set to 'create and go' or 'destroy' as its value.
Password Verification
Displays the system's password configurations.
Note - The current firmware version does not allow the Old Password, New
Password and Confirm Password parameters to be configured if the values for these
parameters were initially configured using CLI.
Port-based Authentication
PAE Port Info
Displays the system level information for each port supported by the Port Access
Entity.
Authenticator PAE Info
Displays configuration objects for the Authenticator Port Access Entity associated
with each port.
AlliedView™-EMS 4.0.1 Device Management Guide Page 47 of 411