Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 49)

Displays the number of RADIUS Access-Response packets received from unknown
addresses and the identifier of the RADIUS accounting client.
Accounting Server Info
Displays the list of RADIUS accounting servers with which the client shares a secret.
TACACS+
Basic Info
Displays basic TACACS+ information.
TACACS+ Server Info
Displays information about TACACS+ server.
Secure Shell
SSH Server
Displays information about the status of public key authentication and the type of
regenerated host key.
Note - Configuring the Regenerate Host Key parameter to 'rsa', 'dsa' or 'rsa1' values
will result to an error message "time out occurred." but the value is successfully set.
Moreover, after the set operation, attempting to view this table will display the
following 'read-only' parameters and should be ignored:
ƒ Server Host Public Key Algorithm
ƒ Server Host Public Key Fragment ID
ƒ Server Host Public Key Fragment Text
ƒ Server Host Public Key Fingerprint Algorithm
ƒ Server Host Public Key Fingerprint Algorithm
ƒ Server Host Public Key Fingerprint Digest Format
ƒ Server Host Public Key Fingerprint
Note - The current firmware version does not allow the Regenerate Host Key
parameter to be set to 'rsa1' as its value.
SSH Client
Displays information about the user name ssh client will use and the value of the
regenerated self key.
Note - Valid MIB Set values for the User Name parameter should range from 1-48.
However, the current firmware version allows the user to enter values in the range
0-160.
Note - The current firmware version does not allow the Regenerate Self Key
parameter to be set to 'rsa1' as its value.
Note - Configuring the Regenerate Self Key parameter to 'rsa' or 'dsa' as its value will
cause the device to be inaccessible and may need the restarted.
AlliedView™-EMS 4.0.1 Device Management Guide Page 49 of 411