Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 239)

Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Status parameter to 'not in service'.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Note - L3 Models: Attempting to launch a WEB Browser with network traffic and/or
collision detected within the network will cause the device to restart.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Address Table
Displays the list of IP interfaces on the switch.
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version does not allow the Device Manager to display
the Destination Network Address parameter on the Edit tab.
Note - L3 Models: The current firmware version returns the value 'NULL' for the
Routing Protocol parameter.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
Note - The current firmware version does not allow the Default TTL parameter to
be configured.
AlliedView™-EMS 4.0.1 Device Management Guide Page 239 of 411