Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 274)

Note - The current firmware version does not allow the Actor System Priority and
Collector Maximum Delay parameters to be configured.
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Note - The current firmware version returns 'noSuchName' for the Port Number
parameter.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Actor System Priority
ƒ Actor Operational Key
ƒ Partner Administrative System Priority
ƒ Partner Administrative System ID
ƒ Actor Port Priority
ƒ Partner Administrative Port
ƒ Partner Administrative Port Priority
Note - Setting the Actor Administrative Status parameter and the Partner
Administrative Status parameter to 'lacpActivity' or 'lacpTimeout' will result in the
same hex value of '6C'. On the other hand, setting them to 'distributing' or
'defaulted' will result in the same hex value of '64'.
LACP Statistics
Displays Link Aggregation information for every port that is associated with this
device.
Note - The current firmware version returns 'noSuchName' for all parameters under
this sub-menu option.
LACP Debug
Displays Link Aggregation debug information for every port that is associated with
this device.
Note - The current firmware version returns 'noSuchName' for all parameters under
this sub-menu option.
AlliedView™-EMS 4.0.1 Device Management Guide Page 274 of 411