Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 115)

Route Table
Displays the IP routing table on the router.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
ICMP Statistics
Displays ICMP statistics.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and spanning tree status. The Bridge submenus are greyed out if bridges not
configured.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
ATM Menu
From the ATM menu you can view and edit ATM information. The ATM instance submenus
are greyed out if no ATM instances are configured. The ATM channel submenus are greyed
out if no ATM channels are configured.
Instance Configuration
Displays ATM Instance configuration information.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ
Max VPC
ƒ Max VCC
ƒ Max Active VPI Bits
ƒ Max Active VCI Bits
ƒ ILMI VPI
ƒ ILMI VCI
ƒ
Neighbor IP Address
ƒ Neighbor Name
Attempting to configure these parameters will result in the error message: "The
error occurred with 'Set' operation. Error: noSuchName."
AlliedView™-EMS 4.0.1 Device Management Guide Page 115 of 411