Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 75)

Note - The current firmware version returns a "noSuchName" value for the
following parameters:
ƒ
Alignment Error Frames
ƒ Multi Collision Frames
ƒ SQE Test Errors
ƒ Deferred Transmissions
ƒ Excessive Collisions
ƒ Internal MAC Transmit Errors
ƒ
Carrier Sense Errors
ƒ Symbol Errors
Additional Info
Displays information about a table containing 64-bit versions of error counters.
Note - The current firmware version is unable to display any value for the Port
Number and Alignment Error Frames (HC) parameters.
Note - The current firmware version returns a ‘noSuchName’ value for the Internal
MAC Transmit Errors (HC) and Internal MAC Received Errors (HC) parameters.
Detail Info
Displays detailed port information such as duplex mode.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Tagged Mode
ƒ Default Priority
ƒ Row Status
ƒ Port Flow Control Config
ƒ
Port Speed
ƒ Reactivate
ƒ Combo Ethernet Config
Note - Device Manager does not handle 8-bit string parameters correctly. As a
result, the Autonegotiation Capabilities Config parameter will display an
unrecognizable value and will not be configurable. The Autonegotiation Capabilities
Status and Remote Autonegotiation Capabilities parameters will also display
unrecognizable values.
Note - The Physical Address Type parameter is not applicable to the AT-8000S
series and should be ignored.
Note - The combo ports will not display the Port Context Menu on right-mouse
click if logged-on in SNMPv3 mode using a user account with no read-write access
to the Transceiver Type parameter.
AlliedView™-EMS 4.0.1 Device Management Guide Page 75 of 411