Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 251)

Unit Info
Displays information about the system's stacking mode, units supported in the
system, total number of ports and number of ports in use.
Unit Management Info
Displays management information for each unit in the system.
Module Info
Displays module information for each unit in the system.
Management Info
General Info
Displays common management information.
General Config
Displays basic control of the system.
Note - The current firmware version does not allow the RS-232C Mode parameter
to be configured.
Note - It may take a while for the device to set the STP Status parameter to ‘enable’.
As a result, a timeout error may occur. However, the value is still set successfully.
MIB List
Displays the list of MIB capability entries supported by the system.
TFTP Services
Displays information about the files that have been downloaded from and uploaded
to the device.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Description
ƒ Transfer Type
ƒ File Type
ƒ
File Control
ƒ Download CFG File
ƒ Multi Image Control ID
Note - Valid MIB Set values for the Load Type parameter will depend on the
Description parameter:
ƒ boot file - download
ƒ
log file - upload
ƒ config file - upload/download
AlliedView™-EMS 4.0.1 Device Management Guide Page 251 of 411