beautypg.com

Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual

Page 154

background image



The AT-A46 expansion module port cannot be manually set to 1000Mbps. However,

the current firmware version allows the Port Speed and Mode parameter for this

port to be set to '1Gbps full-duplex' or '1Gbps half-duplex'

The current firmware version allows the Port Speed and Mode parameter of the
AT-A47 expansion module port to be set to '10Mbps full-duplex' or '100Mbps full-

duplex' even if the GBIC installed is not capable of 10/100 Mbps connectivity.

The Port Speed and Mode parameter of the AT-STACKM expansion module port

should have a fixed value of 'auto sense'. However, the current firmware version
allows it to be changed to '10Mbps full-duplex', '100Mbps full-duplex' or '1Gbps full-

duplex'.

AT-8500 Series

AlliedView™-EMS 4.0.1 Device Management Guide

Page 154 of 411