Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 40)

Error Log
Displays information about errors registered to the system cache.
Syslog Device
Displays information about Syslog diagnostic messages.
Note - The current firmware version does not allow the Syslog Device Control
parameter to be configured.
Syslog Collector
Displays the information to generate syslog messages to an aggregating agent or
collector.
Syslog Application
Displays information about a managed entity that provides individual control over
the severity level of the messages that it will generate.
Note - The current firmware version does not allow Severity parameter to be
configured.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the Address Resolution Protocol cache on the switch.
Note - The current firmware version does not allow Physical Address parameter to
be configured. Attempting to configure this parameter to any valid value will result in
the error "The error occurred with 'Set' operation. Error. bad value.".
Note - The current firmware version does not allow Mapping Type parameter to be
configured. Attempting to configure this parameter from 'static' to 'dynamic' value
will result in the error "The error occurred with 'Set' operation. Error. bad value.".
AlliedView™-EMS 4.0.1 Device Management Guide Page 40 of 411