Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 364)

TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
DNS
DNS Server
Displays DNS server information.
Note - The current firmware version does not allow the Status parameter to be set
to 'active' as its value. Attempting do so will result in the error message "The error
occurred with 'Set' operation. Error: time out occurred".
DNS Client
Displays DNS Client information.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Note - The current firmware version returns the value "00 00 CD 00 00 00" for the
Management MAC Address parameter of the following ports:
• port 11 of XEM-12T
• port 12 of XEM-12S
• port 01 of XEM-1XP
This only applies when the XEM module is inserted in Bay 1.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Note - Valid MIB Set values for the Aging Time parameter is in the range [10-630]
inclusive.
AlliedView™-EMS 4.0.1 Device Management Guide Page 364 of 411