GW Instek APS-1102 User Manual - Manual (Page 98)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-34
1. Open the SEQUENCE screen and display the PROGRAM screen.
See “4.4.2 Sequence settings”, for steps for displaying the PROGRAM screen.
2. Press the or key to move the cursor to “TIME”.
ENTER CANCEL
Cursor
3. Press the
ENTER
key to display the modification box.
ENTER CANCEL
Modification box
4. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial and
set a numerical value. The set value will be reflected in output immediately.
Increase Decrease
5. Use these steps to set all columns.
6. After setting all of the columns, press the CANCEL or
ENTER
key to close the modification box.