GW Instek APS-1102 User Manual - Manual (Page 93)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-29
3. Press the
ENTER
key to display the SEQUENCE screen.
ENTER CANCEL
4. Press the or key to select the operation to be performed.
 To control sequence operations: select “CONTROL…”.
(
See “4.4.4 Control of sequence operations”.)
Note This cannot be selected when output is off.
 To program a sequence: Select “PROGRAM”.
(
See “4.4.3 Programming sequences”.)
 To control sequence memory: Select “MEMORY…”.
(
See “4.4.5 Clear sequence memory”.)
ENTER CANCEL
5. Press the
ENTER
key to display the desired screen .
ENTER CANCEL