GW Instek APS-1102 User Manual - Manual (Page 118)

4.8 Using Memory Functions
APS-1102 Programmable AC/DC Power Source 4-54
Memory control is performed via the “MEMORY” screen. After selecting an operation listed in Table
4-14, use the selection box to specify the target memory number.
When a memory number is specified, the main settings stored in that memory are displayed in the left side
of the menu window.
Table 4-14. Menu Items in MEMORY Screen
Indication on Control Panel Type
STORE... Stores settings to specified memory number.
RECALL... Recalls settings from specified memory number.
CLEAR... Clears settings in specified memory number.
Settings from selected
memory are shown here
Figure 4-16. Example of Settings from Memory