GW Instek APS-1102 User Manual - Manual (Page 108)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-44
4. Press the
ENTER
key to display the selection box.
ENTER CANCEL
5. Press the key to move the cursor to “ON”.
ENTER CANCEL
6. Press the
ENTER
key to set output on, at which time the output on/off LED goes on.
OUTPUT OUTPUT
Output off Output on
7. Select “SEQUENCE”, then press the
ENTER
key to display the SEQUENCE screen .
ENTER CANCEL
Output on/off LED is on