GW Instek APS-1102 User Manual - Manual (Page 123)

4.9 Amplification of External Signal
APS-1102 Programmable AC/DC Power Source 4-59
the
ENTER
key.
 This sets the selected output voltage range.
ENTER CANCEL
5. Press the or key to move the cursor to the icon, then press the
ENTER
key.
 The modification box is displayed.
ENTER CANCEL
6. Press the and keys to move the cursor to the column to be changed, turn the MODIFY dial
and set a numerical value.
 The set value is reflected immediately in the output.
Increase Decrease
7. After entering all of the values, press the CANCEL or
ENTER
key to close the modification box.