GW Instek APS-1102 User Manual - Manual (Page 120)

4.8 Using Memory Functions
APS-1102 Programmable AC/DC Power Source 4-56
4. Press the or key to select the operation to be performed.
ENTER CANCEL
5. Press the
ENTER
key to display the selection box.
ENTER CANCEL
6. Press the or key to move the cursor to the target memory number.
ENTER CANCEL
7. Check the settings shown in the left side of the menu window, and if they are OK press the
ENTER
key.
 This performs the operation specified in step 4 for the specified memory number.