GW Instek APS-1102 User Manual - Manual (Page 49)

3.4 Main Operation Example
APS-1102 Programmable AC/DC Power Source 3-19
3.4.3 Setting output voltage range
Select 100 V or 200 V. The output voltage range cannot be changed while output is on.
The setting range varies according to the output voltage range.
Table 3-5. List of Setting Ranges for Various Output Voltage Range
Setting
Setting Range
100 V range 200 V range Unit
DC voltage 200.0 to +200.0 400.0 to +400.0 V
AC voltage
Wave-
form SIN/SQU 0.0 to 140.0 0.0 to 280.0 Vrms
ARB1 to 16 0.0 to 400.0 0.0 to 800.0 Vp-p
Output peak current limiter (positive) +10.0 to +42.0 +5.0 to +21.0 A
Output peak current limiter
(negative) 42.0 to 10.0 21.0 to 5.0 A
Output average current limiter 1.0 to 10.5 1.0 to 5.3 A
Positive voltage setting limit +5.0 to +200.0 +10.0 to +400.0 V
Negative voltage setting limit 200.0 to 5.0 400.0 to 10.0 V
External input gain 0.0 to 200.0 0.0 to 400.0 times
 Operation steps
To set the output voltage range, select in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor