GW Instek GRS-6000A Series - Manual

i
Declaration of Conformity
We
GOOD WILL INSTRUMENT CO., LTD.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No.69 Lushan Road, Suzhou New District Jiangsu, China.
declares that the below mentioned product
GRS-6052A, GRS-6032A
are herewith confirmed to comply with the requirements set out in the Council Directive on
the Approximation of the Law of Member States relating to Electromagnetic Compatibility
(89/336/EEC, 92/31/EEC, 93/68/EEC) and Low Voltage Equipment Directive
(73/23/EEC, 93/68/EEC).
For the evaluation regarding the Electromagnetic Compatibility and Low Voltage
Equipment Directive, the following standards were applied:
◎ EMC
EN 61326-1: Electrical equipment for measurement, control and laboratory use –– EMC
requirements (1997+A1: 1998)
Conducted and Radiated Emission
EN 55011: 1998 Group I class A Electrostatic Discharge
IEC 61000-4-2: 1995
Current Harmonic
IEC 61000-3-2: 1995 Radiated Immunity
IEC 61000-4-3: 1995
Voltage Fluctuation
IEC 61000-3-3: 1994 Electrical Fast Transients
IEC 61000-4-4: 1995
-------------------------
Surge Immunity
IEC 61000-4-5: 1995
-------------------------
Conducted Susceptibility
IEC 61000-4-6: 1996
-------------------------
Power Frequency Magnetic Field
IEC 61000-4-8: 1993
-------------------------
Voltage Dips/ Interrupts
IEC 61000-4-11: 1994
◎ Safety
Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC
Safety Requirements
IEC/EN 61010-1:2001
GRS-6052A/6032A OSCILLOSCOPE
USER MANUAL
⎯ ⎯
i
CONTENTS PAGE
1.
PRODUCT INTRODUCTION.................................................
1-1.Description……………………………………………….
1-2.Feature………………………………………………….... 1
1
2
2. TECHNICAL SPECIFICATIONS………………………… 5
3. PRECAUTIONS BEFORE OPERATION…….…………...
3-1.Unpacking the Oscilloscope……………….………….…
3-2.Checking the Line Voltage…………………..…………..
3-3.Environment……………………………………..………
3-4.Equipment Installation and Operation………………....
3-5.CRT Intensity……………………………………………
3-6.Withstanding Voltage of Input Terminals……………... 9
9
9
10
10
10
10
4. PANEL INTRODUCTION……………………..…………...
4-1.Front Panel……………………………………………….
4-2.Rear Panel……………………………………….………. 11
13
32
5. OPERATION METHOD………………………………...….
5-1.Readout Display……………………………………..…...
5-2.Connecting Input Signals..………………………………
5-3.Adjustment and Checks…………………………………
5-4.Function Check…..………………………………………
5-5.Basic Operation………….….…………………………....
5-6.Digital Storage Functions………………………………..
5-7.Measurement Application……………………………….
5-8.RS-232 Interface Remote Control……………………… 34
34
37
38
40
42
51
60
62
6. MAINTENANCE……………………………………………
6-1.Fuse Replacement………………………………………..
6-2.Line Voltage Conversion……………………………..….
6-3.Cleaning…………………………………………………. 94
94
94
95
7. BLOCK DIAGRAM………………………………………... 96