GW Instek APS-1102 User Manual - Manual (Page 92)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-28
4.4.2 Sequence settings
Sequence settings are made as described below.
 Input per step via control panel
 Programmed from PC, with USB transfer to APS-1102
 Sequence data is edited and transferred using accompanying control software
See “4.4.3 Programming sequences” below, for further description of the program messages
for sequence operations.
See the control software user’s manual, for description of the control software.
The operations on the control panel are described below.
 Operation steps
To display the sequence menu, select “SEQUENCE” in the MISC menu
.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the MISC menu.
Press the or key to move the cursor to “SEQUENCE”.
ENTER CANCEL