GW Instek APS-1102 User Manual - Manual (Page 192)

6.3 Command Descriptions
APS-1102 Programmable AC/DC Power Source 6-20
Type
Range 200.0 to 200.0 (400.0 to 400.0)
Second parameter (DC voltage operation type)
Type
Range 0 (CONST), 1 (KEEP), or 2 (SWEEP)
Third parameter (AC voltage [Vrms]/[Vp-p])
* The unit varies according to the waveform set by the seventh parameter.
Type
Range 0.0 to 140.0 [Vrms] or 0.0 to 400.0 [Vp-p]
(0.0 to 280.0 [Vrms] or 0.0 to 800.0 [Vp-p])
Fourth parameter (AC voltage operation type)
Type
Range 0 (CONST), 1 (KEEP), or 2 (SWEEP)
Fifth parameter (frequency)
Type
Range 1.0 to 550.0
Sixth parameter (frequency operation type)
Type
Range 0 (CONST), 1 (KEEP), or 2 (SWEEP)
Seventh parameter (waveform)
*The unit for the third parameter AC voltage varies depending on the seventh parameter
setting.
Type
Range 0 (SIN), 1 (SQU), or 2 to 17 (ARB1 to ARB16)
Eighth parameter (waveform operation type)
Type
Range 0 (CONST) or 1 (KEEP)
Ninth parameter (start phase)
Type
Range 0.0 to 359.9
10th parameter (start phase operation)
Type
Range 0 (CONST) or 1 (KEEP)
11th parameter (step synchronized output)
Type
Range 0 (00), 1 (01), 2 (10), or 3 (11)
12th parameter (step synchronized output operation type)
Type
Range 0 (CONST) or 1 (KEEP)
Command example: SEQ:EPAR 0, 0, 100.0, 0, 50.0, 0, 1, 0, 90.0, 0, 0, 0
Query
example: SEQ:EPAR?
Response example: 0, 0, 100.0, 0, 50.0, 0, 1, 0, 90.0, 0, 0, 0