GW Instek APS-1102 User Manual - Manual (Page 56)

3.4 Main Operation Example
APS-1102 Programmable AC/DC Power Source 3-26
 Operation steps
Select the icon in the SET menu corresponding to the desired setting, then set a numerical value.
 Output peak current limiter (positive):
 Output peak current limiter (negative):
 Output average current limiter:
1. Press the or key to move the cursor to the or or icon.
ENTER CANCEL Cursor
2. Press the
ENTER
key to display the modification box.
ENTER CANCEL Modification box
3. Press the
and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase Decrease
4. Press the CANCEL
or
ENTER
key to close the modification box.