GW Instek APS-1102 User Manual - Manual (Page 23)

2.2 Installation Environment
APS-1102 Programmable AC/DC Power Source 2-3
2.2 Installation Environment
Note the following precautions to ensure the safe use and reliability of this product.
 Installation sites
 Do not set the product on its top or side when installing it on a floor or desktop.
 Make sure that the four rubber feet on the bottom of the product are set evenly on a flat surface
when placed on a floor or desktop.
 To prevent risk of toppling, be sure to set this product on a surface that is level and is not subject to
vibration, so that it can securely support this product weight (approximately 9.5 kg).
 Cautions for transport
When transporting this product, use the grips on the top side to keep the product upright while moving
it horizontally.
If the APS-1102 is exposed to sudden shifts in ambient temperature and/or humidity during
transportation in winter, internal condensation may occur.
In such a case, leave the APS-1102 until the condensation has cleared before connecting the
APS-1102 to a power supply.
！
CAUTION