GW Instek APS-1102 User Manual - Manual (Page 169)

5.6 System Menu
APS-1102 Programmable AC/DC Power Source 5-43
5.6.6 Output on/off setting at power-on
The APS-1102 can be set to automatically turn output on at power-on.
However, when restarting after a system lock, the APS-1102 will start with output off regardless of this
setting.
 Operation steps
1. Press the or key to move the cursor to “INIT OUT”.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to “ON” (when off) or to “OFF” (when on).
ENTER CANCEL
4. Press the
ENTER
key to complete the setting. Press the CANCEL key to cancel the setting.