GW Instek APS-1102 User Manual - Manual (Page 258)

9.6 Sequence Function
APS-1102 Programmable AC/DC Power Source 9-10
9.6 Sequence Function
Output parameters can be changed abruptly or swept in sequence.
Signal source is internal signal source only.
Sequence function settings are stored in memory with battery backup.
 Number of sequences
1 sequence per operation mode (AC or AC+DC mode) and output range (100 V or 200 V)
 Number of steps
1 to 255 (within 1 sequence)
 Step time
0.1 ms to 999.9999 s (resolution 0.1 ms)
 Operations within step
Constant, keep, or linear sweep
 Parameters
DC voltage, AC voltage, frequency, waveform, and step synchronized output (2 bits)
 Jump times
1 to 999 or continuous
 Sequence control
Start:
Starts a sequence.
Stop: Stops a sequence.
Hold: Maintains current step output. Restarted when a sequence is started.
Branch: Branches to the specified step.