GW Instek APS-1102 User Manual - Manual (Page 84)

4.3 Measurement of Harmonic Current
APS-1102 Programmable AC/DC Power Source 4-20
3. Press the
or key to move the cursor to the harmonic order to be displayed, then press
the
ENTER
key.
ENTER CANCEL
 When HC1 to HC4 have been selected as the displayed measurements, the following harmonic
current measured values are displayed.
The displayed harmonic order (XXth) changes according to these ranges, and 10 lines of
measurement data are displayed in each range.
HC1: 1st to 10th
HC2: 11th to 20th
HC3: 21st to 30th
HC4: 31st to 40th
The displayed harmonic order (XXth) changes according to these ranges, and 10 lines of
measurement data are displayed in each range.
Figure 4-4. Example of Harmonic Measurement Window Display
4. Press the
or
key to switch the HC1, HC2, HC3, and HC4 screens.
5. Press the CANCEL
key to end harmonic measurement and return to the TOP MENU (normal display).