GW Instek APS-1102 User Manual - Manual (Page 110)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-46
c) Operations after starting sequence
When a sequence is started, the status icon ( ) is displayed in the status window to indicate that
the sequence is being executed. A message box is also displayed to indicate the step number being
executed.
After returning to the SET screen, if the sequence is executed, the current step settings will not be
shown in the SET screen. When the sequence is completed, the settings from the final step will be
shown. If the final step voltage and frequency settings are outside of the setting range limit, the setting
range limit lower limit value will be shown.
Status icon indicates that sequence
is being executed
Step number being executed
Figure 4-14. LCD Screen During Sequence Execution