GW Instek APS-1102 User Manual - Manual (Page 54)

3.4 Main Operation Example
APS-1102 Programmable AC/DC Power Source 3-24
3.4.6 Setting output frequency
The AC output frequency can be set in the following range.
Table 3-8. Output Frequency Setting
Setting Range Resolution Setting Accuracy
1.0 Hz to 550.0 Hz 0.1 Hz ±100 ppm (1.0 Hz to 550.0 Hz, 23 ±5°C)
See “3.4.7 Using limiter functions”, when using an output frequency setting range limit.
 Operation steps
To set the output frequency, set a numerical value labeled in the SET menu.
1. Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the modification box.
ENTER CANCEL
Modification box
3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase Decrease
4. Press the CANCEL or
ENTER
key to close the modification box.