GW Instek APS-1102 User Manual - Manual (Page 244)

8.3 Storage, Repackaging, and Transport
APS-1102 Programmable AC/DC Power Source 8-4
8.3 Storage, Repackaging, and Transport
Store the APS-1102 in a location that meets the installation requirements.
See “2.2 Installation Environment”, for description of installation requirements.
a) Storage for long periods of non-use
 Remove the power cord from the outlet and the main unit.
 Store the main unit on a shelf or rack where it will be protected from airborne dirt and dust.
When it may be subjected to dust, cover it with a cloth or polyethylene sheet.
 The minimum storage environment requirements are a temperature range of 10°C to +50°C, with
5% to 95% RH, but it is also important to avoid locations subject to abrupt temperature changes
and/or exposure to direct sunlight. If possible, choose a storage environment that has a steady
ambient temperature.
See “9.16 Ambient Temperature Range, Ambient Humidity Range, Etc.”, for
detailed storage conditions.
b) Repackaging and transport
Note the following caution points when repacking the main unit for transport, repair, or for some other
reason.
 Wrap the main unit in a polyethylene bag or sheet.
 Use a cardboard box that is strong enough to support the main unit weight and large enough for its
size.
 Pack with shock-absorbent material on all six sides of the main unit.
 Inform the transport company that this product is a high-precision machine.