GW Instek APS-1102 User Manual - Manual (Page 75)

4.1 Use as a DC Power Source
APS-1102 Programmable AC/DC Power Source 4-11
4. Press the
ENTER
key to set the selected waveform.
ENTER CANCEL
4.1.7 Use measurement function
Measured values are displayed in the measured value window MEASURE screen, which enables the
output status to be monitored.
a) Measured value window
Figure 4-3. Example of Measured Value Window (During AC+DC Mode)
When a measurement is out of range, “-----” is displayed in the numerical value field.
Select “AVG” to measure DC component only, or select “RMS” to measure the superimposed
value of DC and AC components.