GW Instek APS-1102 User Manual - Manual (Page 40)

3.3 I/O Terminals
APS-1102 Programmable AC/DC Power Source 3-10
3.3.2 USB connector
Use a commercial (off-the-shelf) USB cable to connect the rear USB connector to a PC.
Attach the accompanying ferrite core to the USB cable to reduce the leakage electric wave.
See “6. USB INTERFACE”, for description of using a USB connection for remote control from a
PC.
USB connector
Figure 3-7. USB Connector
The USB cable should be a commercial Type A (male) to Type B (male) cable.
Attach the accompanying ferrite core to the USB cable to reduce the leakage electric wave.
！
CAUTION