GW Instek APS-1102 User Manual - Manual (Page 180)

6.2 Command List
APS-1102 Programmable AC/DC Power Source 6-8
a) Input buffer
 The number of commands that can be sent at one time is limited by the input buffer capacity
(10,000 characters).
 The transferred commands are first stored in the input buffer, then successively interpreted
and executed.
 When commands are being interpreted and executed, an error occurs if an illegal command is
found. That command and those following will not be executed.
 When command interpretation and execution are completed, the input buffer is cleared to
enable input of more commands.