GW Instek APS-1102 User Manual - Manual (Page 262)

9.14 Withstand Voltage and Insulation Resistance
APS-1102 Programmable AC/DC Power Source 9-14
9.14 Withstand Voltage and Insulation Resistance
Between input power line vs. output/case or input power line/case vs. output
 Withstand voltage
1500 V AC
 Insulation resistance
30 MΩ or above, 500 V DC
9.15 Safety and EMC Compliance
(Only Models with a CE Marking on the Rear Panel)
 Safety
Compliant with the following standard requirement
 EN61010-1:2001
Class
I
Pollution Degree 2
 EMC Compliance
Compliant with the following standard requirement
 EN61326-1: 2006 (Class A)
 EN 61000-3-2: 2000+A2:2005
 EN 61000-3-3: 1995+A1: 2001 +A2: 2005
9.16 Ambient Temperature Range, Ambient Humidity Range, Etc.
Operating environment: Indoor use
Altitude:
2000 m or lower
Operation guarantee: 0 to +40°C/5 to 85% RH
When absolute humidity is 1 to 25 g/m 3 , with no condensation
Performance guarantee: +5 to +35°C, 5 to 85% RH
When absolute humidity is 1 to 25 g/m 3 , with no condensation
Storage condition: 10 to +50°C, 5 to 95% RH
When absolute humidity is 1 to 29 g/m 3 , with no condensation
Figure 9-1 shows the ambient temperature and humidity ranges.