GW Instek APS-1102 User Manual - Manual (Page 168)

5.6 System Menu
APS-1102 Programmable AC/DC Power Source 5-42
5.6.5 Time unit setting
The unit used to indicate the time parameter can be specified.
Select either “s” (second) or “ms” (millisecond) for this time unit.
 Operation steps
1. Press the or key to move the cursor to “TIME UNIT”.
ENTER CANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTER CANCEL
Selection box
3. Press the or key to move the cursor to the displayed unit.
ENTER CANCEL
4. Press the
ENTER
key to complete the setting. Press the CANCEL key to cancel the setting.