GW Instek APS-1102 User Manual - Manual (Page 107)

4.4 Using the Sequence Function
APS-1102 Programmable AC/DC Power Source 4-43
4.4.7 Execution of sequence operations
Once sequence programming has been completed, start the sequence.
The execution steps for the sequence operations are described below.
a) When using the MISC menu
 Operation steps
1. Press the TOP MENU key (shortcut key) to return to the top menu. In the top menu, “SET” is
shown in the upper left corner of the menu window.
The sequence is executed only when output is on. Make sure output is on beforehand.
SEQUENCE
STOP START
TOP
MENU LOCAL HOLD
2. Press the or key to move the cursor to the icon.
ENTER CANCEL
3. Press the
ENTER
key to display the MISC menu
Press the or key to move the cursor to “OUTPUT” .
ENTER CANCEL
Cursor